R2hobbies.com Eurgle Especificaciones descargar pdf (Pagina 13)

· Timing Advance

· Cutoff Type

NOTE: Soft cutoff is always automatically active in Governor Mode.

·Start Type

· Governor Mode

NOTE:

1. In helicopter application, setting in ‘Governor Low’ or ‘Governor High’ is required. And we recom-

mend to set the start type in ‘Soft start’ to get much smooth start for your helicopters.

2. In ‘Governor Mode’, the start time is generally between 10~45 seconds, which is different depend on

the load.

3. In Governor Mode, the brake is always disabled and soft cutoff is automatically active.

Option 1: Low advance timing

0°~15°

Option 2: middle advance timing

5 °~ 20 °

Recommended for most motors .Gives a good balance of power and efficiency.

Option 3: High advance timing

15° ~ 30 °

Recommended for most of higher pole count motors

Option4:Auto(default) Recommended for most of all brushless motors.

Option 1 :Hard cutoff (default)

When battery voltage reaches cut-off voltage the motor will shutdown immedi-

ately. Motor can be restarted by closing the throttle to the lowest position and

then move the throttle as normal

Option 2: Soft cutoff

When battery voltage reaches cut-off voltage, the ESC will slowly reduce motor

power to zero, you will notice a decrease in power and it is time to land, the throt-

tle maintains its full linear response.

Option 1: soft start Recommended for helicopters

Option 2:standardstart (default)

Recommended for most of the fixed or folding prop airplanes, and some heli-

copters.

Option 3: Fast start

Recommended for fastest startup.

Option 1: Auto calibrating throttle

(default)

Recommended for general aircraft

Option 2: Governor Low

For helicopter application. Controlling frequency becomes slow, control gain be-

comes increasing.

Option 3: Governor High

For helicopter application. Controlling frequency becomes faster, control gain be-

comes decreasing.

1 2 ... 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios

R2hobbies.com Eurgle Especificaciones Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos R2hobbies.com Eurgle