R2hobbies.com Eurgle Especificaciones descargar pdf (Pagina 6)

Eurgle ESC 100A HV MANUALS 6 page/ 14 pages

·Connect the ‘Y’ wires to USB. Plug in receiver lead and power cable from the Eurgle controller to those of

the ‘USB Linker’ respectively. BE SURE THE POLARITY IS CORRECT! (Seeing the label on the USB

Linker)

·Plug in the Eurgle USB Linker to one of the available USB ports of your computer. The red LED on ‘USB

Linker’ will come on, and the green Led of ESC will light.

Ⅸ Using the software

·Open the software by double clicking the icon

‘Eurgle’ on your desktop.

·Select the com port by clicking the menu of

‘Port Num.’*

NOTE:1) Wrong polarity of P cables’ connection may cause damage to controller, please make sure the

polarity is always correct.

2) When the ESC is powered, then it is not necessary to use the auxiliary ‘Y’ wires but directly plug

the receiver lead of the ESC into the USB Linker to read and programming.

3) The ‘P Cables’ of 100A-HV is designed for ONLY connecting with Eurgle USB Linker to read data

from ESC and program the controller on PC. Wrong usage may cause permanent damage to

controller, and such damage will AVOID manufacturer’s warranty.

e.g, when the ESC is powered, DO NOT connect the ‘P Cables’ (red and black) of 100A-HV to ‘Reserve for OPTO’ on USB as power

supply, otherwise will cause both controller and USB BURNED.

P Cables of the ESC

Receiver lead of the ESC

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

R2hobbies.com Eurgle Especificaciones Pagina 6